Boston Carpet

Boston Carpet | Steam Carpet Cleaning

A Cambridge carpet owner asked for information on this – so we wrote an article !. Obviously we cover boston carpetthe Cambridge area as well as Brookline and Boston.

This method of steam cleaning your carpet entails very hot water getting fed to a spray extraction instrument or wand, coupled to a pump vacuum power unit.

The cleansing solution is injected under pressure deep into the carpet through water jet nozzles. The water will then penetrate the fiber all the way right down to the backing. This action will loosen any embedded soil, eliminate oil and grease deposits, and get your carpet cleaner than it has ever been.

There are many kinds and makes of steam carpet cleaners accessible out there, ranging from little portables to the large and quite effective truck mounted units. The principle is the very same regardless of what model you select.

The designs which can be truck mounted are designed so that only the hose and the wand are taken into the area getting cleaned. These models are extremely effective, delivering very hot water and creating a high vacuum that can be powered by diesel fuel, gas, propane, or perhaps from the motor from the truck.

Most carpet producers, fiber producers, and specialist cleaners endorse this process for attaining soil elimination efficiency.

The genuine disadvantage to steam carpet cleansing are the problems which might be related with over wetting and lengthier drying times. These might be eliminated however, by an experienced operator who uses devices
that ares certainly well maintained and in great overall operating condition.


At present, there are two methods being used with steam carpet cleaning.

1. This strategy requires a traffic lane cleaner becoming sprayed onto the traffic lanes after which agitated to the fibers. The entire region is then cleaned by utilizing a scorching water extractor that has a cleansing solution currently being injected into the fibers by way of the wand.

2. The next approach consists of a free rinse emulsifying pre-spray currently being sprayed onto the whole carpet, then agitated to the fibers.

Steam cleansing procedures

1. Prepare the products and materials. In pump or power sprayer you must mix the free rinsing pre-spray. While in the solution tank of the extractor and combine the rinsing agent.
2. If you have a good deal of furniture to move make yourself a floor plan.
3. If your area being cleaned has furniture you must take away as much as feasible.
4. Totally vacuum the carpet. In the event the pile is crushed or matted, use a pile brush to loosen the soils that will make vacuuming a lot more effective.
5. Pre-spray an excellent amount of the pre-spray.
6. Making use of a grooming tool, agitate the prespray deep into the fibers then let it sit for ten – fifteen minutes, making sure that it doesn’t dry out.
7. Extract the area making use of a portable, truck mounted, or automatic carpet cleaner.
8. Repeat methods five by means of 7 until the whole area has been cleaned.
9. Groom the cleaned area, replace all furniture that was removed, then clean all devices that you used.

Regardless of whether you are a Cambridge carpet owner or not – we hope you found this article useful.

Back to Carpet Cleaning Boston home

Another tip from Carpet Cleaners Boston

Filed under Cambridge Carpet